Immersion Cooler

This Immersion Cooler, when used with the Ratek TH5 Thermoregulator will allow accurate temperature control to ±0.1°C at and below ambient temperatures. When used with an insulated water bath, up to 20 litres can be controlled, depending on the heat load.

Recirculating Cooler

The RC2 uses an identical cooling unit to the RC1, but rather than a flexible line and coil, has a built in heat exchanger. When connected to a suitable waterbath via the inlet and outlet fittings, water is pumped through the heat exchanger, cooled then returned to the bath. Temperature control as with the RC1 is provided by an external temperature controller.

Recirculating Cooler

This refrigerated waterbath will hold approximately 12 litres of water and can cool to -10°C. with the use of suitable additives. When used with the Ratek TH5 Thermoregulator, temperature control from 0°c to 99. 9° with a stability of ± 0.05°c is possible, (The TH5 can be factory set with a minimum of -20° if required) . The built in heavy duty recirculating pump has a glandless magnetic head that reduces the possibility of leaking and contamination.

Shaking Waterbath

The Ratek Shaking Waterbath is designed to suit a variety of procedures where temperature controlled water and agit ation is required, and can operate continuously for long periods of time. For added versatility the waterbath and shaker can operate independently, the shaker platform can be easily removed.

Heated Waterbath

The range of Ratek waterbaths is designed to suit a variety of procedures where temperature controlled water is required, they can operate continuously for long periods of time. Four standard models are available ranging from 4 litre to 20 litre. Custom made waterbaths are available to suit specific applications